---

name: ic-setup description: Generate hardware setup and wiring instructions for IC10 code. Use when user wants to know how to physically connect devices to use their IC10 scripts.

IC10 Hardware Setup

Generate complete hardware setup instructions including device connections, wiring diagrams, power requirements, and installation steps.

Workflow

1. Analysis Phase

Use Task tool to spawn:

• code-analyzer - Extract device information from code

2. Hardware Guide Generation Phase

Use Task tool to spawn:

• hardware-guide - Create complete setup instructions with diagrams

What You Get

A complete hardware guide including:

Device Connection Table

• IC port mappings (d0-d5)
• Device types and purposes
• Required connections (logic cables, power, pipes, etc.)

Wiring Diagrams

• ASCII art showing physical layout
• Logic cable connections
• Power network topology
• Atmosphere/hydraulic routing (if applicable)

Power Requirements

• Total power calculation
• Peak vs average consumption
• Recommended power source (battery/generator/APC)

Installation Steps

• Device placement recommendations
• Connection procedures
• Testing checklist
• Troubleshooting tips

Safety Notes

• Pressure system warnings
• Power handling precautions
• Rocket launch safety

Instructions

When user asks for hardware setup:

1. Review the IC10 code

   • Identify all devices used (d0-d5, db)
   • Check for device comments
   • Note any special requirements

2. Launch code-analyzer to extract device info

3. Launch hardware-guide to create setup instructions

4. Present the complete guide including:

   • Visual diagrams
   • Connection table
   • Power requirements
   • Installation steps

Example Triggers

• "How do I wire this up?"
• "What devices do I need?"
• "Show me the setup"
• "Installation instructions"
• "Hardware guide for this code"
• "Physical connections"
• "How do I connect..."

Output Format

After setup guide is generated, present:

Copy## Hardware Setup: [Script Name]

### Quick Summary

**Devices Needed**: X devices (list)
**Total Power**: XW (peak)
**Difficulty**: Beginner/Intermediate/Advanced

---

### Device Connections

| IC Port | Device | Connections Required |
|-----------|--------|-------------------|
| d0 | Gas Sensor | Logic cable + Power |
| d1 | Active Vent | Logic cable + Power + Atmos pipe |
...

### Wiring Diagram

[ASCII diagram showing physical setup]

Copy
### Power Analysis

| Device | Power Draw | Notes |
|---------|------------|--------|
| IC Housing | 10W | Always on |
| Gas Sensor | 5W | ... |
... | ... | ... |
| **Total** | **XXW** | Peak: XXW, Avg: XXW |

**Power Source**: Battery ≥ XXXW or Generator

### Installation Steps

#### Step 1: Device Placement
[ ] Place IC Housing...
[ ] Place Gas Sensor...
...

#### Step 2: Logic Connections
[ ] Connect Gas Sensor to IC d0...
...

#### Step 3: Power Connections
[ ] Power IC Housing...
...

#### Step 4: Test
[ ] Load script...
[ ] Test operation...

Notes

• Setup guide is based on code analysis
• In-game testing recommended to verify all connections work
• Power calculations are estimates (actual may vary)
• Some scripts may require additional devices not in code (e.g., APC for power distribution)