---

name: tmux description: Remote control tmux sessions using tmux-buddy (tmuxb) for interactive CLIs (python, gdb, emacs, vim, etc.) by sending keystrokes and scraping pane output.

Agent Usage Guide for tmuxb

Use tmux as a programmable terminal multiplexer for interactive work.

We use a small tmux wrapper called tmux-buddy (cli command: tmuxb). It provides a few helpers for LLM agents such as yourself when using tmux.

A practical guide for LLM agents using tmuxb to interact with tmux sessions. This guide emphasizes defensive practices that account for shared terminal sessions and timing uncertainties.

Quickstart (isolated socket)

Copytmuxb new -S <agent-name>.sock <session-name> # create a new session in an isolated socket
tmuxb capture   # see the screen inside tmux, including the cursor position
tmuxb capture --if-changed  # get the output, but only if its changed
tmux send -- '"echo hello world" :Enter' # Send some key sequences, always remeber to add :Enter if needed, :Enter is never pressed automatically
tmuxb capture --if-changed # view the results

Using an isolated socket (-S) avoids using the humans' custom tmux config. should be something like: claude-codex, codex, gemini. etc It must be a valid part of a filename the name of the tmux session, a good value is the name of the project

Session Files: Simplifying Repeated Commands

tmuxb supports a .tmuxb_session file that stores the session name and socket path. When present, you can omit these from every command.

Creating a Session with Auto-Generated File

Copy# Simplest form - creates session on default tmux server
tmuxb new myproject

# The file contains:
# {:session "myproject"}

If you need an isolated tmux server (separate from your normal tmux), use -S:

Copy# Creates session on a dedicated socket
tmuxb new -S myproject.sock myproject

# The file contains:
# {:session "myproject", :socket "/run/user/100tmuxb/myproject.sock"}

Using the Session File

Once .tmuxb_session exists, commands automatically use it:

Copy# These all work without specifying session or socket:
tmuxb capture
tmuxb send -- '"echo hello" :Enter'
tmuxb list

You can still override with explicit arguments:

Copytmuxb capture other-session                # uses other-session instead
tmuxb capture -S /other/sock               # uses different socket
tmuxb capture -S /other/sock other-session # uses different socket and other-session

File Discovery

tmuxb walks up from the current directory looking for .tmuxb_session, similar to how git finds .git. This means the file can be in a project root and work from subdirectories.

Session Lifecycle

Copy# Create session (writes .tmuxb_session)
tmuxb new -S dev.sock myproject

# Work with session (no args needed)
tmuxb capture
tmuxb send -- '"make build" :Enter'

# Kill session (auto-deletes .tmuxb_session if it matches)
tmuxb kill myproject

Flags for new

• -S, --socket - Socket path (bare names go to $XDG_RUNTIME_DItmuxb/)
• --no-session-file - Don't create .tmuxb_session
• -f, --force - Overwrite existing .tmuxb_session

The Cardinal Rule: Always Capture First

Before sending any commands, always capture the current terminal state. The terminal may have changed since you last looked at it.

Copy# ALWAYS do this before sending commands
tmuxb capture

# Or with explicit session if no .tmuxb_session file:
tmuxb capture SESSION

Why? Because:

1. A human user might be watching and interacting with the same session
2. Another agent might be sharing the session
3. A previous command might have produced unexpected output
4. An application might have crashed or exited
5. Time has passed and you have no idea what happened

If more than a few seconds have passed since your last capture, capture again. If you're about to send a complex sequence, capture first. When in doubt, capture. If in doubt, capture!

Verify Before Proceeding

When you start an application (vim, emacs, python, etc.), verify it actually started before sending commands to it.

Bad pattern:

Copy# DON'T DO THIS - you have no idea if vim actually started
tmuxb send demo -- '"vim" :Enter [:Sleep 500] "i" "Hello"'

Good pattern:

Copy# Start vim
tmuxb send demo -- '"vim" :Enter'

# Wait and verify vim is running
tmuxb capture demo
# Look for vim's interface in the output

# Only then send more commands
tmuxb send demo -- '"i" "Hello"'

This applies to any state transition:

• Starting an editor (vim, emacs, nano)
• Entering a REPL (python, node, clojure)
• Running a command that changes the prompt
• Opening a menu or dialog
• Switching modes within an application

Breaking Up Long Sequences

Don't send extremely long command sequences without verification checkpoints. If something fails early in the sequence, you'll send garbage to whatever state the terminal ends up in.

Bad pattern:

Copy# 30+ seconds of commands with no verification
tmuxb send demo -- \
  '"vim" :Enter [:Sleep 500] "i"' \
  '"line 1" :Enter [:Sleep 1000]' \
  '"line 2" :Enter [:Sleep 1000]' \
  # ... 20 more lines ...
  ':Escape ":wq" :Enter'

Better pattern:

Copy# Start vim
tmuxb send demo -- '"vim" :Enter'
sleep 1

# Verify vim started
tmuxb capture demo
# Check output shows vim interface

# Now send the content
tmuxb send demo -- '"i" "line 1" :Enter "line 2" :Enter'

# Verify periodically for long sequences
tmuxb capture demo

# Continue...

Handling Shell Quoting

Use -- to separate tmuxb options from EDN arguments:

Copytmuxb send demo -- :C-x
tmuxb send demo -- '"hello" :Enter'

For strings with special characters, use appropriate quoting:

Copy# Exclamation marks need $'...' quoting (bash history expansion)
tmuxb send demo -- $'"Hello!" :Enter'

# Or escape with backslash
tmuxb send demo -- '"Hello World\!" :Enter'

Timing Considerations

For repeated actions with delays:

Copy# Press down 5 times with 300ms between each
tmuxb send demo -- '[:Down 5 :delay 300]'

Working with Vim

Vim has modes. Always be aware of which mode you're in.

Copy# Capture first
tmuxb capture demo

# If in normal mode, enter insert mode before typing
tmuxb send demo -- '"i" "your text here"'

# Return to normal mode
tmuxb send demo -- :Escape

# Vim commands start with : in normal mode
tmuxb send demo -- '":w" :Enter'  # save
tmuxb send demo -- $'":q!" :Enter'  # quit without saving (note $'' for !)

Verify mode transitions:

Copy# After escaping to normal mode, capture to verify
tmuxb capture demo
# Look for -- INSERT -- or similar mode indicator absence

Working with Emacs

Emacs uses modifier keys extensively:

Copy# C-x C-s to save
tmuxb send demo -- :C-x :C-s

# M-x for command prompt
tmuxb send demo -- :M-x

# Cancel with C-g
tmuxb send demo -- :C-g

Example: Safe Vim Editing Session

Here's a complete example showing defensive practices. With a .tmuxb_session file, you can omit the session name:

Copy# 1. Capture initial state
tmuxb capture
# Verify we're at a shell prompt

# 2. Start vim
tmuxb send -- '"vim test.txt" :Enter'

# 3. Wait and verify vim started
tmuxb capture
# Look for vim interface, check we're not still at shell

# 4. Enter insert mode and type
tmuxb send -- '"i" "Hello World" :Enter "Line 2"'

# 5. Verify content was entered
tmuxb capture
# Check the text appears in the buffer

# 6. Save and quit
tmuxb send -- ':Escape ":wq" :Enter'

# 7. Verify we're back at shell
tmuxb capture
# Confirm shell prompt is visible

Without a session file, specify session explicitly:

Copytmuxb capture demo
tmuxb send demo -- '"vim test.txt" :Enter'
# etc.

Common Mistakes

1. Forgetting to add :Enter when sending interactive commands
2. Not capturing before sending commands
3. Assuming an application started without verifying
4. Sending a long sequence without checkpoints
5. Forgetting -- before keywords like :C-x
6. Not accounting for bash history expansion (! must be escaped)
7. Assuming the terminal state hasn't changed after time passes
8. Not verifying mode changes in modal editors

Summary

• Take advantage of the .tmuxb_session file to avoid repeating session/socket args
• Capture before every send operation
• Verify state transitions (app started, mode changed, etc.)
• Break long sequences into verifiable chunks
• Use -- before EDN keywords
• Handle shell quoting carefully (single quotes around EDN with double-quoted strings)
• Trouble using the tool? tmuxb --help
• When in doubt, capture again